Waste code: 7250
Suggested EWC codes: 170601 (Insulation materials) 170605 (Building materials)
Hazard class: Not subject to IMDG/ADR
Packing group: Not subject to IMDG/ADR
UN no.: Not subject to IMDG/ADR
Several types of waste contain asbestos; some require transport classification. Determine the correct classification for your waste using the safety data sheet or contact SAR for advice.
Asbestos must be packed in two layers of 160-micrometre plastic. The inner bag should be marked so that the use of two layers is evident. The plastic must be taped to make it completely sealed and secured against leakage. All asbestos-containing waste must be covered by the plastic and sealed. The bags can be sent on pallets with collars. When packing on pallets, the height should preferably not exceed 1 metre.
The waste must be clearly labelled with the text “Contains asbestos. Inhaling dust from this material may cause cancer. Use suitable protective equipment”.
If a data sheet is available, it must be attached to the declaration.
Asbestos is landfilled.
Asbestos is carcinogenic and must be packaged and handled correctly to avoid health hazards. Incorrectly packaged asbestos waste must be repackaged, resulting in increased costs for the waste producer.
Always use suitable protective equipment and approved respiratory protection when handling asbestos.
The waste guide uses technical terms and codes to describe how different types of waste should be identified, classified, and handled. This makes it easier to find the correct waste fraction and comply with requirements for sorting, packaging, and delivery.